Altronix Pace1PRMT manual

Overview:

Pace1PRMT is a long range Ethernet adapter kit which transmits data at 100mbps full duplex and

power via a single twisted pair (UTP) or Cat5e or higher cable in a PoE(+) compliant format. The

Pace1PRM receiver is powered via a PoE midspan such as the Altronix Netway series or by an

endspan. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM trans-

ceiver which in turn passes this power to an enabled IP camera/device. These plug and play units

facilitate cost effective solutions for IP devices that need to be installed at distances greater than

100m. They also provide a simple way to replace legacy analog products with new IP devices over

single twisted pair (UTP) or structured cable.

Features:

Rev. 111413

Installation Guide

Pace1PRMT

IP and PoE+ Over Extended Distance UTP or CAT5e

Pace1PRM Receiver and Pace1PTM Transceiver kit

Agency Listings:

• UL/CUL Listed for Information

Technology Equipment (UL 60950-1).

• CE approved.

• C-Tick compliant.

Input (Pace1PRM):

• Powered by midspan or endspan.

PoE compliant to IEEE 802.3af (15W) and

PoE+ compliant to IEEE 802.3at (30W).

Ethernet:

• Connectivity: RJ45, auto-crossover.

• Wire type: 4-pair CAT5 or 1 pair UTP

structured cable.

• Distance: up to 500m (1,640 ft.).

• Speed: 10/100BaseT, half/full duplex, auto

negotiation. PoE compliant to IEEE 802.3af

(15W) and PoE+ compliant to IEEE 802.3at

(30W) delivered to camera by Pace1PTM.

Power provided by Pace1PRM to Pace1PTM

by PoE protocol.*

• Throughput is rated to pass 100mbps of

data at distances up to 500m with

proper headend equipment, this supports

Megapixel, HD720, HD1080.

CAT5e or higher:

• Distance: up to 500m @ 100mbps

(see Maximum Length of Cable Type vs.

Camera Power/PoE Class, pg. 4).

UTP (single pair):

• Distance: up to 152m @ 100mbps

(see Max. Length of Cable Type vs.

Camera Power/PoE Class, pg. 4).

LED Indicators:

• Pace1PRM/Pace1PTM:

Green - PoE ON (by respective RJ45 jack).

• Pace1PRM and Pace1PTM (RJ45 jack):

Yellow and Green LED IP Link status,

10/100Base-T/active.

Environmental:

• Operating and Storage Temperature:

(refer to Technical Specifications

chart pg. 2).

• Humidity: 20 to 85%, non-condensing.

Functions:

• Auto detection and protection of legacy

non-PoE cameras/devices.

Applications:

• Extend Network link distance in an

industrial environment over 700m

(see note, pg. 2).

• Retrofit digital IP cameras in an analog

CCTV CAT5e wired installations.

• Works with Megapixel, HD720, HD1080

and VGA (SD) cameras (see note, pg. 3).

Mechanical:

• Dimensions (W x L x H approx.):

Pace1PRM/Pace1PTM:

3.5” x 3.5” x 1”

(88.89mm x 88.89mm x 25.4mm).