Casio WV-200E-4AVEF manual

Casio WV-200E-4AVEF
(1)
  • Número de páginas: 5
  • Tipo de archivo: PDF

Operation Guide 3139

1
MA0807-EA

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.
Caution!
Your watch is shipped with its Auto Display feature (which continually changes the
contents of the digital display) turned on. Calibration signal reception is disabled while
Auto Display is turned on.
Press any button to turn off Auto Display and return to the Timekeeping Mode.
About This Manual
Button operations are indicated using the letters shown
in the illustration.
Each section of this manual provides you with the
information you need in order to perform operations in
each mode. Further details and technical information
can be found in the “Reference” section.

General Guide

Press
C
to change from mode to mode.
In any mode (except when a setting screen is on the display), press
B
to illuminate the display.
Timekeeping Mode World Time Mode Countdown
Timer Mode
Alarm ModeStopwatch Mode
Press .

Radio-controlled Atomic Timekeeping

Day of week
Year
Home Time
(Hour : Minutes Seconds)
Month Day
PM indicator
DST
indicator
This watch receives a time calibration signal and updates
its time setting accordingly.
Supported time calibration signals: Germany (Mainfl ingen),
England (Anthorn), United States (Fort Collins), Japan.
See the information under “Signal Reception
Troubleshooting” if you experience problems with time
calibration signal reception.
Current Time Setting
This watch adjusts its time setting automatically in
accordance with a time calibration signal. You can also
perform a manual procedure to set the time and date,
when necessary.
The fi rst thing you should do after purchasing this
watch is to specify your Home City (the city where you
normally will use the watch). For more information,
see “To specify your Home City”.
When using the watch outside the areas covered by the time signal transmitters, you
will have to adjust the current time setting manually as required. See Timekeeping
for more information about manual time settings.
The U.S. time calibration signal can be picked up by the watch while in North
America. The term North America in this manual refers to the area that consists of
Canada, the continental United States, and Mexico.
To specify your Home City
City code
1. In the Timekeeping Mode, hold down
A
until the city
code starts to ash, which indicates the setting screen.
2. Press
D
(east) and
B
(west) to select the city code you
want to use as your Home City.
Time calibration signal reception is supported when
any one of the city codes shown in the table below is
selected as your Home City.
German/U.K. Signal Japan Signal U.S. Signal
City
Code
City
Name
City
Code
City
Name
City
Code
City
Name
City
Code
City
Name
City
Code
City
Name
LIS Lisbon ATH Athens HKG Hong Kong HNL Honolulu YWG Winnipeg
LON London MOW Moscow BJS Beijing ANC Anchorage CHI Chicago
MAD Madrid TPE Taipei YVR Vancouver MIA Miami
PAR Paris SEL Seoul LAX Los Angeles YTO Toronto
ROM Rome TYO Tokyo YEA Edmonton NYC New York
BER Berlin DEN Denver YHZ Halifax
STO Stockholm MEX Mexico City YYT St. Johns
3. Press
A
twice to exit the setting screen.
Important!
Normally, your watch should show the correct time as soon as you select your Home
City code. If it does not, it should adjust automatically after the next auto receive
operation (in the middle of the night). You can also perform manual receive or you
can set the time manually.
The watch will receive the time calibration signal automatically from the applicable
transmitter (in the middle of the night) and update its settings accordingly. For
information about the relationship between city codes and transmitters, see Home
City Codes and Transmitters.
Under factory default settings, auto receive is turned off for all of the following city
codes: HNL (Honolulu), ANC (Anchorage), MOW (Moscow), HKG (Hong Kong), and
BJS (Beijing). For details about turning on auto receive for these city codes, see To
turn auto receive on and off.
You can disable time signal reception, if you want. See To turn auto receive on and
off for more information.
See the maps under Approximate Reception Ranges for information about the
reception ranges of the watch.
If you are in an area that does not use Daylight Saving Time (summer time), turn off
the DST setting.
Time Calibration Signal Reception
There are two different methods you can use to receive the time calibration signal:
auto receive and manual receive.
Auto Receive
With auto receive, the watch receives the time calibration signal automatically up to
six times a day. When any auto receive is successful, the remaining auto receive
operations are not performed. For more information, see About Auto Receive.
Manual Receive
Manual receive lets you start a time calibration receive operation with the press of a
button. For more information, see To perform manual receive.
Casio WV-200E-4AVEF

¿Necesitas ayuda?

Número de preguntas: 0

¿Tienes alguna pregunta sobre Casio WV-200E-4AVEF o necesitas ayuda? Haz tu pregunta aquí. Proporciona una descripción clara y completa de tu consulta. Cuantos más detallada sea tu consulta, más fácil será para otros Casio WV-200E-4AVEF propietarios responder adecuadamente a tu pregunta.

Ver el manual de Casio WV-200E-4AVEF aquí, gratis. Este manual pertenece a la categoría Relojes y ha sido calificado por 1 personas con un promedio de 8.3 . Este manual está disponible en los siguientes idiomas: Inglés . ¿Tienes alguna pregunta sobre Casio WV-200E-4AVEF o necesitas ayuda? Haz tu pregunta aquí

Casio WV-200E-4AVEF especificaciones

General
Marca Casio
Modelo WV-200E-4AVEF
Producto Reloj
EAN 4971850083573
Idioma Inglés
Tipo de archivo PDF
Detalles técnicos
Tipo de mecanismo Electrónico
Cronógrafo -
Tipo de esfera de reloj Esfera LCD
A prueba de agua Si
Hermético hasta una presión de 20 ATM
Hermético hasta una profundidad de 200 m
A prueba de golpes -
Cronómetro Si
Función de hora mundial Si
Función de alarma Si
Calendario Si
Modo reloj 12h/24h
Tipo de reloj Reloj de pulsera
Diseño
Material del cuerpo del reloj Resin,Stainless steel,Synthetics
Color de la carcasa Black,Red,Silver
Material de la banda Resina
Color principal de la correa Rojo
Tipo de vidrio de reloj Mineral
Forma de la caja Alrededor
Color principal de la esfera del reloj Negro / Plateado
Estilo de los números marcadores Numeración arábiga
Diseño de producto -
Control de energía
Tipo de batería CR1620
Duración de batería 3 año(s)
Numero de baterías soportadas 1
Peso y dimensiones
Ancho 47.7 mm
Profundidad 15.2 mm
Altura 52.2 mm
Peso 58 g
mostrar más

Preguntas frecuentes

A continuación, encontrarás las preguntas más frecuentes sobre Casio WV-200E-4AVEF.

¿No aparece tu pregunta? Haz tu pregunta aquí